Seatech
Marine Grade Products

Electronic Gyro Boat Stabilizer
Model RS250 — 2.5 Square Foot = (.232 Meters)

WESMAR RS250 Electronic Gyro - Boat Stabilizer System
Pair 2.5 sq. foot hydrodynamic fiberglass stabilizer fins with stainless steel 17-4 pH 13/4 inch keyed shafts Pair of actuators assemblies complete with bearings and bushings
1 each V-10 (5) GPM pump 2 bolt "A" keyed shaft (splined available on request) mount with foot bracket.
2 each stainless steel double plates with bolts/nuts and washers
2 each stainless steel centering pins
2 each Ruland adapters
2 each keyed arm levers
2 each cylinders — 4-inch stroke, 1 1/2 -inch bore, 7/8 -inch shaft
2 each proportional control valves pre mounted to tank
2 each low profile Potentiometers 5 K
2 each Kelp Cutters
2 each CPS 1000 Gyro Control with full Trim Control, Gyro Sensitivity Control,
Fin Position Indicators, Engage and Standby LEDs, 12-24 V DC Operation,
and Brightness Control
1 each electronic gyro with 10 feet of interconnect
1 each proportional valve driver card assembly:
pre-wired for plug in assembly:
proportional valves – pre wired Console interconnect – interconnect
5K potentiometers – interconnect 12-24 VDC power source – interconnect ,Standard Manifold
Pressure, tank, P1,T1,P2,T2 (color coded) Dump valve
Ports Pressure relief valve
10 Micron filter Gauge – pre mounted
* 10-Gallon Tank Includes:
Cooler
Fluid sight gauge
Complete Package System: $14,875.00 USD

Option Stabilizer Equipment

Hull blocks — pair of 18x18x2.25 Mahogany Blocks $1,000.00 USD Pair.
Reverse Micro Lockout Switch $ 215.00 USD Each.
Remote Engage/Standby Station for Bridge $ 800.00 USD Each.