Underwater Boat Thru-Hull Lights for DC Systems
Models available in either silicon bronze or 316 stainless steel for utmost resistance against corrosion and electrolysis action. This underwater light thru hull is fully accessible from inside the boat for servicing and/or bulb changes. Lens made from 15mm ground glass. End cap and cable gland made of tough, non-corrosive glass-reinforced nylon. The standard underwater thru-hull fixture may be used with a 50W MR16 halogen reflector bulb. The 35W HID Xenon Version comes standard with an IP65 ballast complete with preformed cabling and AMP connectors. For uneven inner mounting surfaces, an optional self-leveling mounting kit is available and includes a floating bronze clamp ring and 4 bronze set screws. A 4' extension harness is also available for locating ballast in a remote location.
IML Underwater Thru-Hull Lights for AC Systems
A high output 120/277VAC-150W (50/60Hz) Thru-Hull Light designed with utmost attention to thermal management (maintaining low operating temperature). Thermal cut-out switch will prevent overheating should the unit be left on while hull is out of the water when planing or during haul-out. Casing and bezel are made from 316 Stainless Steel. Also included is a top quality Osram Metal Halide lamp & ballast. Ballast housing is complete with weather-proof connectors and pre-formed cabling.