Imtra 2 x 2' High Output LED Marine Utility Lights, w/100W Driver, 100-300V Anodized NEUTRAL IP66 ILIM90401 *While Supplies Last*

2' High Output LED Marine Utility Light Dual Fixture Kit, 2 x 43W, 100-300V

A dual fixture kit featuring a pair of our 2' LED Marine Utility Lights, external AC to DC driver, Y-cable, and  two 10' extension harnesses.  The first genuine LED solution for 2' fluorescent "shop" fixtures.  Each light providing greater light output with reduced power consumption than the legacy fluorescent fixtures.  Using a patented remote phosphor process, the Imtra LED Marine Utility Lights are brighter and more efficient than any other comparable length LED or fluorescent linear fixtures.  Switching to the LED lights eliminates maintenance and carrying costs associated with changing mercury-containing bulbs, hazardous recycling costs, and the need to carry spares.

Note:  The phosphor coated lens will appear yellow when the fixture is “off” but transforms to bright white when fixture is powered “on” An excellent choice for:

• Utility & maintenance rooms
• Engine rooms
• Generator spaces
• Bilge areas & holds

Features:

• Low profile form factor (less than 2" in height)
• Solid state (vibration-proof) design
• Anodized aluminum casing with low copper die cast aluminum powder coated end caps
• UV-Protected polycarbonate lens with silicone rubber gasket
• Water tight Y-cable, (2) 10' cable harnesses and external 100W driver
• Thermal management "breathing" vent with liquid/particle repelling membrane
• Patented remote phosphor coating process

Benefits:

• Lower head room requirements
• No maintenance, no risk of broken glass & mercury, no delicate bulbs to store
• Impervious to damaging effects caused by corrosive salt water environment
• May be hosed down without risk of water entry
• LEDs stay cool even if fixture is run 24 hours a day, 7 days a week, 365 days a year
• Reduced heat, higher efficiencies, uniform light distribution, combine to deliver far greater light output (per watt) than any current Linear LED Fixture on the market today

• Housing Material	Anodized aluminum casing, low-copper die cast aluminum powder coated end caps, UV stabilized PCB lens
  Fixture Dimensions	25.41 x 4.66 x 1.91 in. (645 x 118 x 49mm)
  External Driver Dimensions	12” (305mm) x 2.44” (62mm) x 1.67” (43mm)
  Y-Cable Dimensions	8.1 in. (205mm) overall length
  Finish	Anodized Aluminum Base, Yellow Lens (turns white when powered)
  Voltage	100-300VAC
  Input Power	86W (total)
  Lumens	4200 lms each (8400 lms total)
  Beam Angle	115 degrees (x2)
  Correlated Color Temperature (CCT)	Neutral (4100K)
  Color Rendering Index (CRI)	>70
  Lifetime Hours (70% lm)	>50,000 hrs. (L70)
  Safety Standards Compliance	UL2108, UL8750, UL1598A, CSA C22.2#250.0, IEL-LM-79, FCC47 CFR Part 15, Class A
  Mounting Method	Screw-Mount
  Ingress Protection	IP66
  Electrical Protections	Reverse Polarity, ESD: IEC/EN 61000-4-2, Transient: ANSI IEEEC62.41-2-2001-Cat B
  Warranty	5 years
  Country of Origin	Made in USA